The following sources were used in the compilation of this resource:
Arnold, C. (1998). The nature of ground motion and its effect on buildings. Berkeley, CA: National Information Service for Earthquake Engineering, University of California, Berkeley.
Arnold, C. (2016). Seismic safety of the building envelope. Retrieved from http://www.wbdg.org/resources/env_seismicsafety.php
Association of Wall and Ceiling Industries New Zealand. (2014). Code of practice for design, installation and seismic restraint of suspended ceilings (draft August 2014). Tauranga, New Zealand: Author.
Beattie, G. (2000). The design of building services for earthquake resistance. Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand. Retrieved from http://www.iitk.ac.in/nicee/wcee/article/2462.pdf
Beattie, G., Shelton, R., Thurston, S. & Liu, A. (2011). On the ground in Christchurch. Build, 123, 48–49. Retrieved from http://www.buildmagazine.org.nz/articles/show/on-the-ground-in-christchurch/
BRANZ. (2014). Resilience feature. Build, 141. Retrieved from http://www.buildmagazine.org.nz/issues/show/build-141/
BRANZ. (2008). Claddings feature. Build, 109. Retrieved from http://www.buildmagazine.org.nz/issues/show/build-109/
BRANZ. (2011). Canterbury earthquakes feature. Build, 126. Retrieved from http://www.buildmagazine.org.nz/issues/show/build-126/
BRANZ. (2013). BRANZ seminar series: Building seismic resilience [PowerPoint slides]. Wellington, New Zealand.
BRANZ. (2013). Site analysis. Retrieved from http://www.level.org.nz/site-analysis/site-conditions-and-ground-stability/
Buchanan, A. (Ed.). (2007). New Zealand timber design guide. Wellington, New Zealand: The New Zealand Timber Industry Federation Inc.
Buchanan, A., Bull, D., Dhakal, R., MacRae, G., Palermo, A. & Pampanin, S. (2011). Base isolation and damage-resistant technologies for improved seismic performance of buildings – A report written for the Royal Commission of Inquiry into Building Failure Caused by the Canterbury Earthquakes. Retrieved from http://canterbury.royalcommission.govt.nz/documents-by-key/2011-09-2377/$File/ENG.ACA.0020.pdf
Buchanan, A., Pampanin, S. & Palermo, A. (2013). Post-tensioned timber buildings – design guide Australia and New Zealand. Christchurch, New Zealand: Structural Timber Innovation Company .
Building Act 2004. Retrieved from http://www.legislation.govt.nz/act/public/2004/0072/latest/DLM306036.html
Building Regulations 1992, Schedule 1: The New Zealand Building Code. Retrieved from http://www.legislation.govt.nz/regulation/public/1992/0150/latest/DLM162570.html
Canterbury Earthquakes Royal Commission. (2013). Final Report, Volume 1: Summary and recommendations in Volumes 1–3, seismicity, soils and the seismic design of buildings. Retrieved from http://canterbury.royalcommission.govt.nz/Final-Report-Volume-One-Contents
Canterbury Earthquakes Royal Commission. (2013). Final Report, Volume 3 – Low-damage building technology. Retrieved from http://canterbury.royalcommission.govt.nz/Final-Report-Volume-Three-Contents
CCANZ. (2015). Residential concrete slab on ground floors. Retrieved from https://www.nzconcretecontractors.org.nz/wp-content/uploads/2018/12/Residential-Concrete-Slab-On-Ground-Floors.pdf
Climate Control Companies Association. (2014). Seismic guide for mechanical services subcontractors. Auckland, New Zealand: Author.
Department of Building and Housing. (2011). New Zealand Building Code Handbook (3rd ed.). Wellington, New Zealand: Author.
Department of Building and Housing. (2006). External moisture – An introduction to weathertightness design principles. Retrieved from https://www.building.govt.nz/assets/Uploads/building-code-compliance/e-moisture/e2-external-moisture/weathertight-design-principles/external-moisture-an-introduction.pdf
Department of Building and Housing. (2011). Briefing to the Royal Commission of Inquiry into building failure caused by the Canterbury Earthquakes – The building regulatory framework. Retrieved from https://canterbury.royalcommission.govt.nz/documents-by-key/2011-09-2768
Dhakal, R. (2010). Damage to non-structural components and contents in 2010 Darfield earthquake. Bulletin of the New Zealand Society for Earthquake Engineering, 43(4), 404–411.
Dhakal, R. (2011). Structural design for earthquake resistance: Past, present and future. Retrieved from http://canterbury.royalcommission.govt.nz/documents-by-key/2011-09-2753
Dhakal, R., MacRaw, G. & Hogg, K. (2011). Performance of ceilings in February 2011 Christchurch earthquake. Bulletin of the New Zealand Society for Earthquake Engineering, 44(4), 479-389.
Dizhur, D., Moon, L. & Ingham, J. (2012). Did masonry veneer stand up? Build, 131, pp 74–75. Retrieved from http://www.buildmagazine.org.nz/articles/show/did-masonry-veneer-stand-up
Engelhardt, M. & Popov, E. (1988). Seismic eccentrically braced frames. Journal of Construction and Steel Research, 10, 321–354.
Federal Emergency Management Agency. (2012). Reducing the risks of nonstructural earthquake damage – A practical guide (FE-74) (4th ed). Washington, DC,: Author.
Fletcher Construction. (2014). Seismic compliance – NZBC – Non-structural engineering services, revision B. Auckland, New Zealand: Author.
Fletcher Construction. (2015). Seismic performance of engineering systems in building – Non-structural construction – Site works. Auckland, New Zealand: Author.
GeoNet. (2013). New Zealand Modified Mercalli Intensity Scale. Retrieved from https://www.geonet.org.nz/earthquake/mmi
GNS Science. (2013). Earthquakes. Retrieved from http://www.gns.cri.nz/Home/Learning/Science-Topics/Earthquakes
Helm, N. (2011). Understanding our building legislation. Build, 122, 52. Retrieved from http://www.buildmagazine.org.nz/articles/show/understanding-our-building-legislation/
Hogg, S. (2013). Moving to low damage design. Build, 134, 50. Retrieved from http://www.buildmagazine.org.nz/assets/PDF/Build-134-50-Feature-Low-Damage-Design.pdf
Hopkins, D. & Stuart, G. (2002). Report on cost benefit of improving the performance of buildings in earthquake. Wellington, New Zealand: Department of Internal Affairs
How, M. (2013, June 28). Turning a blind eye. Progressive Building, 99. Auckland, New Zealand: AGM Publishing.
International Association for Earthquake Engineering (IAEE). (1986). IAEE guideline for earthquake resistant non-engineered construction. Retrieved from http://www.nicee.org/IAEE_English.php
IPENZ. (2011). Standards and regulation for building construction in New Zealand. Retrieved from https://canterbury.royalcommission.govt.nz/documents-by-key/20110930.1/$File/ENG.IPENZ.0001F.pdf
IPENZ. (2011). Why buildings respond differently to earthquakes. Retrieved from https://fl-nzgs-media.s3.amazonaws.com/uploads/2016/06/IPENZ-FactSheet-ChchEarthquake28Mar2011.pdf
Kam, W., Pampanin, S. & Elwood, K. (2011). Seismic performance of reinforced concrete buildings in the 22 February Christchurch (Lyttelton) earthquake. Bulletin of the New Zealand Society for Earthquake Engineering, 44(4). Retrieved from http://www.nzsee.org.nz/db/Bulletin/Archive/44(4)0239.pdf
King, A. (2008). Earthquake loads & earthquake resistant design of buildings. Judgeford, New Zealand: BRANZ Ltd.
MacRae, G. & Clifton, C. (2013). Low damage design of steel structures. Paper presented at the Steel Innovations 2013 Workshop, Christchurch, Steel Construction New Zealand. Retrieved from https://www.scnz.org/wp-content/uploads/2020/11/Low-Damage-Design-of-Steel-Structures_MacRae_Clifton.pdf
MacRae, G., Clifton, C. & Megget, L. (2011). Review of NZ building codes of practice – Report to the Royal Commission of Inquiry in the Building Failure Caused by the Christchurch Earthquakes. Retrieved from https://canterbury.royalcommission.govt.nz/documents-by-key/20110923.14
MBIE. (2012). Repairing and rebuilding houses affected by the Canterbury earthquakes. Retrieved from http://www.building.govt.nz/guidance-on-repairs-after-earthquake
MBIE. (2013). Below-floor work. Retrieved from https://www.building.govt.nz/building-code-compliance/canterbury-rebuild/below-floor-work-canterbury-builder-guide/
MBIE. (2013). Above-floor work. Retrieved from https://www.building.govt.nz/building-code-compliance/canterbury-rebuild/above-floor-work-canterbury-builder-guide/
MBIE. (2013). Guidance for territorial authorities and property owners on initial seismic assessments. Retrieved from http://www.nzsee.org.nz/db/PUBS/AISPBE/NZSEE_ISA_Guide_for_TAs_and_Owners_Ver2_Nov14.pdf
New Zealand Society for Earthquake Engineering (NZSEE). (2014). Assessment and improvement of the structural performance of buildings in earthquakes. Retrieved from http://www.nzsee.org.nz/db/PUBS/2006AISBEGUIDELINESCorr3_(incl_2014_updates).pdf
New Zealand Society for Earthquake Engineering (NZSEE). (2015). Assessment and improvement of the structural performance of buildings in earthquakes Section 10 Revision seismic assessment of unreinforced masonry buildings. Retrieved from https://www.nzsee.org.nz/library/guidelines/assessment-and-improvement-of-the-structural-performance-of-buildings-in-earthquake/
Palmer, S. J. (2013). Strength reduction factors for foundations and earthquake load combinations including overstrength factors. Retrieved from http://www.nzsee.org.nz/db/2013/Paper_14.pdf
Pender, M. J. (1995). Earthquake resistant design of foundations. Retrieved from http://www.nzsee.org.nz/db/Bulletin/Archive/29%283%290155.pdf
Pender, M. J. (2010). Seismic assessment and improvement of building foundations. Auckland, New Zealand: Faculty of Engineering, The University of Auckland.
SESOC. (2011). Practice note: Design of conventional structural systems following the Canterbury earthquakes. Retrieved from http://canterbury.royalcommission.govt.nz/documents-by-key/20111221.1908
Shelton, R. (2009). Revised seismic standard for building services. Build, 111, 60–61. Retrieved from http://www.buildmagazine.org.nz/articles/show/revised-seismic-standard-for-building-services/
Spencer, B. & Soong, T. (1999). New applications and development of active, semi-active and hybrid control techniques for seismic and non-seismic vibration in the USA. Proceedings of International Post-SMiRT Conference Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control of Vibration of Structures. Retrieved from https://www.researchgate.net/profile/Billie_Spencer/publication/238693124_New_applications_and_development_of_active_semi-active_and_hybrid_control_techniques_for_seismic_and_non-seismic_vibration_in_the_USA/links/5440ed1e0cf251bced6149e0/New-applications-and-development-of-active-semi-active-and-hybrid-control-techniques-for-seismic-and-non-seismic-vibration-in-the-USA.pdf
Standards New Zealand. (2004). NZS 1170.5:2004 Structural design actions, Part 5: Earthquake actions – New Zealand. Wellington, New Zealand: Author.
Standards New Zealand. (2004). NZS 1170.5 Supp 1:2004 Structural design actions, Part 5: Earthquake actions – New Zealand – Commentary. Wellington, New Zealand: Author.
Standards New Zealand. (2004). AS/NZS 1170:2004 Structural design actions. Wellington, New Zealand: Author.
Standards New Zealand. (2009). NZS 4219:2009 Seismic performance of engineering systems in buildings. Wellington, New Zealand: Author.
Standards New Zealand. (2011). NZS 3604:2011 Timber framed buildings. Wellington, New Zealand: Author.
Standards New Zealand. (2020). NZS 2785:2020 Suspended ceilings – Design and installation. Wellington, New Zealand: Author.
Stewart, P. (2012), Seismic shifts. Build, 131, 34. Retrieved from http://www.buildmagazine.org.nz/assets/PDF/Build-131-34-Seismic-Shifts.pdf
Thurston, S. (2008). Seismic performance of brick veneer. Build, 107, 82–83. Retrieved from http://www.buildmagazine.org.nz/articles/show/seismic-performance-of-brick-veneer/
Thurston, S. (2009). Seismic performance of 2-storey brick veneer. Build, 114, 52. Retrieved from http://www.buildmagazine.org.nz/articles/show/seismic-performance-of-2-storey-brick-veneer/
Thurston, S. (2011). Brick veneer stands the test. Build, 127, 64. Retrieved from http://www.buildmagazine.org.nz/articles/show/brick-veneer-stands-the-test/
USG Boral. (2012). Generic seismic design. Auckland, New Zealand: Author.
USG Boral. (2014). Seismic design guidelines – Suspended ceilings. Auckland, New Zealand: Author.
Wellington City Council. (2014). Earthquake strengthen your house.