The following sources were used in the compilation of this resource:

Arnold, C. (1998). The nature of ground motion and its effect on buildings. Retrieved from http://nisee.berkeley.edu/lessons/arnold.html

Arnold, C. (2009). Seismic safety of the building envelope. Retrieved from http://www.wbdg.org/resources/env_seismicsafety.php

Association of Wall and Ceiling Industries New Zealand. (2014). Code of practice for design, installation and seismic restraint of suspended ceilings (draft August 2014). Tauranga, New Zealand: Author.

Beattie, G. (2000). The design of building services for earthquake resistance. Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand. Retrieved from http://www.iitk.ac.in/nicee/wcee/article/2462.pdf 

Beattie, G, Shelton, R, Thurston, S and Liu, A. (2011) On the ground in Christchurch. Build, 123, 48–49. Retrieved from http://www.buildmagazine.org.nz/articles/show/on-the-ground-in-christchurch/

BRANZ. (2014). Resilience feature. Build, 141. Retrieved from http://www.buildmagazine.org.nz/issues/show/build-141/

BRANZ. (2008). Claddings feature. Build, 109. Retrieved from http://www.buildmagazine.org.nz/issues/show/build-109/

BRANZ. (2011). Christchurch earthquakes feature. Build, 126. Retrieved from http://www.buildmagazine.org.nz/issues/show/build-126/

BRANZ. (2013). BRANZ seminar series: Building seismic resilience [Powerpoint slides]. Wellington, New Zealand.

BRANZ. (2013). Site analysis. Retrieved from http://www.level.org.nz/site-analysis/site-conditions-and-ground-stability/

Buchanan, A. (Ed.). (2007). New Zealand timber design guide. The New Zealand Timber Industry Federation Inc, Wellington, New Zealand.

Buchanan, A, Bull, D, Dhakal, R, MacRae, G, Palermo, A, and Pampanin, S. (2011). Base isolation and damage-resistant technologies for improved seismic performance of buildings – A report written for the Royal Commission of Inquiry into Building Failure Caused by the Canterbury Earthquakes. Retrieved from http://canterbury.royalcommission.govt.nz/documents-by-key/2011-09-2377/$File/ENG.ACA.0020.pdf

Buchanan, A., Pampanin, S. and Palermo, A. (2013). Post-tensioned timber buildings – design guide. Retrieved from http://assets2.expan.co.nz/assets/NZ-EXPAN-Post-Tensioned-Timber-Buildings---June-2013-presentation.pdf

Building Act 2004. Retrieved from http://www.legislation.govt.nz/act/public/2004/0072/latest/096be8ed80d15951.pdf

Building Regulations 1992, Schedule 1: The New Zealand Building Code. Retrieved from http://www.legislation.govt.nz/regulation/public/1992/0150/latest/096be8ed8084da3f.pdf

Canterbury Earthquakes Royal Commission. (2013). Final Report, Volume 1: Summary and recommendations in Volumes 1–3, seismicity, soils and the seismic design of buildings. Retrieved from http://canterbury.royalcommission.govt.nz/Final-Report-Volume-One-Contents

Canterbury Earthquakes Royal Commission. (2013). Final Report, Volume 3 – Low-damage building technology. Retrieved from http://canterbury.royalcommission.govt.nz/Final-Report-Volume-Three-Contents

CCANZ. (2013). Briefing note 03–2011, Seismic structural solutions. Retrieved from http://www.ccanz.org.nz/images/document/CCANZ%20Briefing%20Note%203.pdf

CCANZ. (2013). PREcast Seismic Structural System (PRESSS). Retrieved from http://www.ccanz.org.nz/page/PREcast-Seismic-Structural-System-PRESSS.aspx

CCANZ. (2015). Residential concrete slab on ground floors. Retrieved from http://www.ccanz.org.nz/files/documents/b91e0aec-c53e-4f2d-9aa9-57e55ad7ab2f/Residential_Concrete_Slab-On-Ground_Floors.pdf

Clifton, C, and MacRae, G. (2013). Low damage design of steel structures. Paper presented at the Steel Innovations 2013 Workshop, Christchurch, Steel Construction New Zealand. Retrieved from http://www.scnz.org/content/steel-innovations-papers/Low%20Damage%20Design%20of%20Steel%20Structures_MacRae_Clifton.pdf 

Climate Control Companies Association. (2014). Seismic guide for mechanical services subcontractors. Auckland, New Zealand: Author.

Department of Building and Housing (2011). New Zealand Building Code Handbook, Third Edition. Retrieved from http://www.dbh.govt.nz/UserFiles/File/Publications/Building/Compliance-documents/building-code-handbook-3rd-edition-amendment-13.pdf

Department of Building and Housing. (2006). External moisture – An introduction to weathertightness design principles. Retrieved from http://www.building.govt.nz/userfiles/file/publications/whrs/pdf/external-moisture-an-introduction.pdf

Department of Building and Housing. (2011). Briefing to the Royal Commission of Inquiry into building failure caused by the Canterbury Earthquakes – The building regulatory framework. Retrieved from http://canterbury.royalcommission.govt.nz/System-of-Building-Controls 

Dhakal, R. (2010). Damage to non-structural components and contents in 2010 Darfield earthquake. Bulletin of the New Zealand Society for Earthquake Engineering, 43(4), 404–411.

Dhakal, R. (2011). Structural design for earthquake resistance: Past, present and future. Retrieved from http://canterbury.royalcommission.govt.nz/documents-by-key/2011-09-2753

Dhakal, R., MacRaw, G., Hogg, K. (2011). Performance of ceilings in February 2011 Christchurch earthquake. Bulletin of the New Zealand Society for Earthquake Engineering, 44(4), 479-389.

Dizhur, D, Moon, L and Ingham, J. (2012). Did masonry veneer stand up? Build, 131, pp 74–75. Retrieved from http://www.buildmagazine.org.nz/assets/ebooks/B131/build.html#79

Engelhardt, M and Popov, E. (1988). Seismic eccentrically braced frames. Journal of Construction and Steel Research, 10, 321–354. Retrieved from http://www.ce.utexas.edu/prof/wood/ce384r/readingassignments/ebf.pdf

Federal Emergency Management Agency. (2012). Reducing the risks of nonstructural earthquake damage – A practical guide (FE-74), (4th ed). Washington, DC, USA: Author.

Fletcher Construction. (2014). Seismic compliance – NZBC – Non-structural engineering services, revision B. Auckland, New Zealand: Author.

Fletcher Construction. (2015). Seismic performance of engineering systems in building – Non-structural construction – Site works. Auckland, New Zealand: Author.

GeoNet. (2013). New Zealand Modified Mercalli Intensity Scale. Retrieved from http://info.geonet.org.nz/display/quake/New+Zealand+Modified+Mercalli+Intensity+Scale

GNS Science. (2013). Earthquakes. Retrieved from http://www.gns.cri.nz/Home/Learning/Science-Topics/Earthquakes 

Helm, N. (2011). Understanding our building legislation. Build, 122, 52. Retrieved from http://www.buildmagazine.org.nz/articles/show/understanding-our-building-legislation/

Hogg, S. (2013). Moving to low damage design. Build, 134, 50. Retrieved from http://www.buildmagazine.org.nz/assets/PDF/Build-134-50-Feature-Low-Damage-Design.pdf

Hopkins, D and Stuart, G. (2002). Report on cost benefit of improving the performance of buildings in earthquake. Wellington, New Zealand: Department of Internal Affairs

How, M. (2013, June 28). Turning a blind eye. Progressive Building, 99. Auckland, New Zealand: AGM Publishing.

International Association for Earthquake Engineering (IAEE). (1986). IAEE guideline for earthquake resistant non-engineered construction. Retrieved from http://www.nicee.org/IAEE_English.php

IPENZ. (2011). Standards and regulation for building construction in New Zealand. Wellington, New Zealand: Author.

IPENZ. (2011). Liquefaction. Retrieved from http://www.ipenz.org.nz/ipenz/forms/pdfs/ChChFactSheets-Liquefaction.pdf

IPENZ. (2011). Why buildings respond differently to earthquakes. Retrieved from http://www.ipenz.org.nz/ipenz/forms/pdfs/ChchFactSheets-BuildingsRepsonsdDifferently.pdf

Kam, W., Pampanin, S., and Elwood, K., (2011). Seismic performance of reinforced concrete buildings in the 22 February Christchurch (Lyttelton) earthquake. Bulletin of the New Zealand Society for Earthquake Engineering, 44(4). Retrieved from http://www.nzsee.org.nz/db/Bulletin/Archive/44(4)0239.pdf

King, A. (2008). Earthquake loads & earthquake resistant design of buildings. Retrieved from http://www.branz.co.nz/cms_show_download.php?id=405a730d9f218fe0b18d4296e28ff5cf7fad52ab

MacRae, G, Clifton, C and Megget, L. (2011). Review of NZ building codes of practice – Report to the Royal Commission of Inquiry in the Building Failure Caused by the Christchurch Earthquakes. Retrieved from http://canterbury.royalcommission.govt.nz/documents-by-key/20110923.14/$file/ENG.ACA.0016.pdf

MBIE. (2011). Acceptable solutions and verification methods for New Zealand Building Code Clause B1 – Structure. Retrieved from http://www.dbh.govt.nz/UserFiles/File/Publications/Building/Compliance-documents/B1-structure-1st-edition-amendment-12.pdf

MBIE. (2012). Repairing and rebuilding houses affected by the Canterbury earthquakes. Retrieved from http://www.building.govt.nz/guidance-on-repairs-after-earthquake  

MBIE. (2013). Below-floor work. Retrieved from http://www.dbh.govt.nz/UserFiles/File/Publications/Building/Guidance-information/pdf/guide-canterbury-below-floor-work.pdf

MBIE. (2013). Above-floor work. Retrieved from http://www.building.govt.nz/userfiles/file/publications/building/guidance-information/pdf/guide-canterbury-above-floor-work.pdf

MBIE. (2013). Guidance for territorial authorities and property owners on initial seismic assessments. Retrieved from http://www.nzsee.org.nz/db/PUBS/AISPBE/NZSEE_ISA_Guide_for_TAs_and_Owners_Ver2_Nov14.pdf

MBIE. (n.d.). Canterbury earthquake: Technical guidance. Retrieved from http://www.dbh.govt.nz/canterbury-earthquake-technical-guidance

New Zealand Society for Earthquake Engineering (NZSEE). (2014). Assessment and improvement of the structural performance of buildings in earthquakes. Retrieved from http://www.nzsee.org.nz/db/PUBS/2006AISBEGUIDELINESCorr3_(incl_2014_updates).pdf

New Zealand Society for Earthquake Engineering (NZSEE). (2015). Assessment and improvement of the structural performance of buildings in earthquakes Section 10 Revision seismic assessment of unreinforced masonry buildings. Retrieved from http://www.nzsee.org.nz/db/PUBS/AISPBE/2006_AISPBE_Corrigenda_4_9April15.pdf 

NZ Wood. (2013). Seismic performance. Retrieved from http://www.nzwood.co.nz/category/learning-centre/timber-performance/seismic/

Palmer , SJ. (2013). Strength reduction factors for foundations and earthquake load combinations including overstrength factors. Retrieved from http://www.nzsee.org.nz/db/2013/Paper_14.pdf

Pender, MJ. (1995). Earthquake resistant design of foundations. Retrieved from http://www.nzsee.org.nz/db/Bulletin/Archive/29%283%290155.pdf

Pender, MJ. (2010). Seismic assessment and improvement of building foundations. Retrieved from http://masonryretrofit.org.nz/wp-content/uploads/MG1.pdf

SESOC. (2011). Practice note: Design of conventional structural systems following the Canterbury earthquakes. Retrieved from http://canterbury.royalcommission.govt.nz/documents-by-key/20111221.1908 

Shelton, R. (2009). Revised seismic standard for building services. Build, 111, 60–61. Retrieved from http://www.buildmagazine.org.nz/articles/show/revised-seismic-standard-for-building-services/

Spencer, B. and Soong, T. (1999). New applications and development of active, semi-active and hybrid control techniques for seismic and non-seismic vibration in the USA. Proceedings of International Post-SMiRT Conference Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control of Vibration of Structures. Retrieved from http://sstl.cee.uiuc.edu/papers/smirt99.pdf 

Standards New Zealand. (2000). NZS 2785:2000 Suspended ceilings – Design and installation. Wellington, New Zealand: Author.

Standards New Zealand. (2004). NZS 1170.5:2004 Structural design actions, Part 5: Earthquake actions – New Zealand. Wellington, New Zealand: Author.

Standards New Zealand. (2004). NZS 1170.5 Supp 1:2004 Structural design actions, Part 5: Earthquake actions – New Zealand – CommentaryWellington, New Zealand: Author.

Standards New Zealand. (2004). AS/NZS 1170:2004 Structural design actionsWellington, New Zealand: Author.

Standards New Zealand. (2009). NZS 4219:2009 Seismic performance of engineering systems in buildingsWellington, New Zealand: Author.

Standards New Zealand. (2011). NZS 3604:2011 Timber framed buildingsWellington, New Zealand: Author.

Stewart, P. (2012, August), Seismic shifts. Build, 131, 34. Retrieved from http://www.buildmagazine.org.nz/assets/PDF/Build-131-34-Seismic-Shifts.pdf

Thurston, S. (2008). Seismic performance of brick veneer. Build, 107, 82–83. Retrieved from http://www.buildmagazine.org.nz/articles/show/seismic-performance-of-brick-veneer/

Thurston, S. (2009). Seismic performance of 2-storey brick veneer. Build, 114, 52. Retrieved from http://www.buildmagazine.org.nz/articles/show/seismic-performance-of-2-storey-brick-veneer/

Thurston, S. (2011). Brick veneer stands the test. Build, 127, 64. Retrieved from http://www.buildmagazine.org.nz/articles/show/brick-veneer-stands-the-test/

USG Boral. (2012). Generic seismic design. Auckland, New Zealand: Author.

USG Boral. (2014). Seismic design guidelines – Suspended ceilings. Auckland, New Zealand: Author.

Wellington City Council. (2014). Earthquake strengthen your house. Retrieved from http://wellington.govt.nz/~/media/services/rates-and-property/earthquake-prone-buildings/files/eq-stregthenhouse-2014.pdf